|
|
Xerox Phaser 6200DX Color Laser printer $999.99 |
|
|
Xerox Phaser Z7400DN / 7400DN Color Laser Printer $1,000.00 |
|
|
Xerox Phaser 6180MFP/D All-In-One Color Laser Printer Copy/Print/Scan/Fax $949.00 |
|
|
Xerox Phaser 6350 Color Laser Printer $99.99 |
|
|
Xerox Phaser 6250DP Color Laser Printer w/Network Works $145.00 |
|
|
Xerox Phaser 8560 Color Laser Printer Solid Ink $124.99 |
|
|
Xerox WorkCentre 6400/S Multifunction Color Laser Printer – 32 ppm Color/37 ppm $895.35 |
|
|
Xerox Tektronex Phaser 6200dp Color Laser Printer – Page Count 134,179 $85.00 |
|
|
Xerox CoLoR Phaser 8560MFP/D All-In-One Laser Printer $1,199.00 |
|
|
Xerox Phaser 6250DP Color Laser Network Printer $375.00 |
|
|
Xerox Phaser 6130 color laser printer $250.00 |
|
|
Xerox Phaser 7760GX 7760 Color Laser Printer *LOW METER: Just 117K Total Prints $1,175.00 |
|
|
Xerox Phaser 630 Color Laser Printer $99.00 |
|
|
Xerox Phaser 8400 Workgroup Laser Color Printer Solid Ink (FLR) $155.22 |
|
|
XEROX 6700/N PHASER 6700 – LASER PRINTER – COLOR – LASER – COLOUR: UP TO 45 PP.. $1,405.32 |
|
|
Xerox Phaser 7400 color laser printer for parts $49.99 |
|
|
Xerox Phaser 7500 color laser printer NICE $99.99 |
|
|
Xerox Phaser 7700 color laser printer additional trays $79.99 |
|
|
Xerox Phaser 6280/N Color Laser – Refurbished $249.00 |
|
|
Xerox Phaser 7700GX Color Laser Network Printer $500.00 |
|
|
Xerox Phaser 7750/GX Workgroup Color Laser Printer 17,500 copies!! $995.00 |
|
|
Xerox Phaser 7750/DN Workgroup Color Laser Printer 66,000 Copies $795.00 |
|
|
XEROX PHASER1235 COLOR LASER PRINTER $214.00 |
|
|
Xerox Phaser 6250 Color Laser Printer 256MB Network USB Duplexer 72,842 Pages $130.00 |
|
|
Xerox Phaser 6250 Color Laser Printer 256MB Network Duplexer ONLY 4,851 Pages $180.00 |
Xerox Laser Color Information
Xerox Alto
History
The Alto was first conceptualized in 1972 in a memo written by Butler Lampson, inspired by the On-Line System (NLS) developed by Douglas Engelbart at SRI, and was designed primarily by Chuck Thacker. Manufacturing was sub-contracted to Clement Designlabs, whose team included Carl J. Clement, Ken Campbell and Fred Stengel . An initial run of 80 units was produced by Clement Designlabs, working with Tony Ciuffini and Rick Nevinger at Xerox El Segundo, who were responsible for installing the Alto electronics. Due to the success of the pilot run, the team went on to produce approximately 2000 units over the next ten years .
Several Xerox Alto chassis are now on display at the Computer History Museum in Mountain View, California.
Architecture
The Alto had a bit-slice processor based on the Texas Instruments’ 74181 chip, a ROM control store with a writable control store extension and had 128 (expandable to 512) kB of main memory and a hard disk that used a removable 2.5 MB single-platter cartridge (Diablo Systems, a company Xerox later bought) similar to those used by the IBM 2310, all housed in a cabinet about the size of a small refrigerator. The Alto’s CPU was a very innovative microcoded processor which used microcode for most of the I/O functions rather than hardware. The microcode machine had 16 tasks, one of which executed the normal instruction set (which was rather like a Data General Nova), with the others used for the display, memory refresh, disk, network, and other I/O functions. As an example, the bitmap display controller was little more than a 16-bit shift register; microcode was used to fetch display refresh data from main memory and put it in the shift register.
Apart from an Ethernet connection, the Alto’s only common output device was a bi-level (black and white) CRT display with a tilt-and-swivel base, mounted in “portrait” orientation rather than the more common “landscape” orientation. Its input devices were a custom detachable keyboard, a three-button mouse, and an optional 5-key chord keyset. The last two items had been introduced by SRI’s On-Line System; while the mouse was an instant success among Alto users, the chord keyset never became popular.
In the early mice, the buttons were three narrow bars, arranged top to bottom rather than side to side; they were named after their colors in the documentation. The motion was sensed by two wheels perpendicular to each other. These were soon replaced with ball-type mice, which were invented by Bill English. These were photo-mechanical mice first using white light and then using IR to count the rotations of wheels inside the mouse.
The keyboard was interesting in that each key was represented as a separate bit in a set of registers. This characteristic was used to alter where the Alto would boot from. The keyboard registers were used as the address on the disk to boot from, and by holding specific keys down while pressing the boot button, different microcode and operating systems could be loaded. This gave rise to the expression “nose boot” where the keys needed to boot for a test OS release required more fingers than you could come up with. Nose boots were made obsolete by the “move2keys” program that shifted files on the disk so that a specified key sequence could be used.
Several other I/O devices were developed for the Alto, including a TV camera, the Hy-Type daisywheel printer and a parallel port, although these were quite rare. The Alto could also control external disk drives to act as a file server. This was a common application for the machine.
Software
Early software for the Alto was written in the BCPL programming language, and later in the Mesa programming language, which was not widely used outside PARC but influenced several later languages, such as Modula. The Alto keyboard lacked the underscore key, which had been appropriated for the left-arrow character used in Mesa for the assignment operator. This feature of the Alto keyboard may have been the source for the CamelCase style for compound identifiers. Another feature of the Alto was that it was microcode-programmable by the user.
The Alto helped popularize the use of raster graphics model for all output, including text and graphics. It also introduced the concept of the bit block transfer operation, or BitBLT, as the fundamental programming interface to the display. In spite of its small memory size, quite a number of innovative programs were written for the Alto, including:
the first WYSIWYG document preparation systems, Bravo and Gypsy;
the Laurel e-mail tool, and its successor Hardy;
the Sil vector graphics editor, used mainly for logic circuits, printed circuit board, and other technical diagrams;
the Markup bitmap editor (an early paint program);
the first WYSIWYG integrated circuit editor based on the Conway and Mead paradigm;
the first versions of the Smalltalk environment
Interlisp
one of the first network-based multi-person computer games (Alto Trek by Gene Ball).
There was no spreadsheet or database software.
Diffusion and evolution
Technically, the Alto was a small minicomputer, but it could be considered a personal computer in the sense that it was used by a single person sitting at a desk, in contrast with the mainframes and other minicomputers of the era. It was arguably “the first personal computer”, although this title is disputed by others.
The Alto was never a commercial product, although several thousand were built. Universities, including MIT, Stanford, CMU, and the University of Rochester received donations of Altos including IFS file servers and Dover laser printers. These machines were the inspiration for the ETH Zrich Lilith and Three Rivers Company PERQ workstations, and the Stanford University Network (SUN) workstation, which was eventually marketed by a spin-off company, Sun Microsystems. The Apollo/Domain workstation was heavily influenced by the Alto.
The White House information systems department acquired an Alto, and sought to lead Federal computer suppliers in its direction. The EOP issued a request for proposal for a computer system to replace the aging OMB budget system, using Alto-like workstations, connected to an IBM-compatible mainframe. The request was eventually withdrawn because none of the mainframe companies could supply such a configuration.
In 1979, Apple Computer’s co-founder Steve Jobs visited Xerox PARC, where he was shown the Smalltalk-80 programming environment, networking, and most importantly the WYSIWYG, mouse-driven graphical user interface provided by the Alto. He reportedly was not impressed by the first two, but was excited by the last one, and promptly integrated it first into the Apple Lisa and then in the Macintosh, inviting several key researchers to work in his company .
In 19801981, Xerox Altos were used by engineers at PARC and at the Xerox System Development Department to design the Xerox Star workstations.
Xerox and the Alto
Xerox itself was slow to realize the value of the technology that had been developed at PARC. After their unhappy experience with SDS (later XDS) in the late 1960s, the company was reluctant to get into the computer business again with commercially untested designs.
Before the advent of personal computers, like the Apple II models with Visicalc, drove a disbelieving IBM to put their name on the derivative IBM PC, the computer market was dominated by costly mainframes and minicomputers equipped with dumb terminals that time-shared processing time of the central computer. So, through the 1970s, Xerox showed no interest in the work done at PARC. When Xerox finally entered the PC market, with the Xerox 820, they pointedly rejected the Alto design and opted instead for a very conventional model, a CP/M-based machineith the then-standard 80 by 24 character-only monitor, and no mouse.
With the help of PARC researchers, Xerox eventually developed the Xerox Star (and later the cost reduced Star; the 6085) office system, which included the Dandelion and Daybreak workstations. These machines, based on the ‘Wildflower’ architecture described in a paper by Butler Lampson, incorporated most of the Alto innovations, including the graphical user interface with icons, windows, folders, Ethernet-based local networking, and network-based laser printer services.
Xerox only realized their mistake in the early 1980s, after Apple’s Macintosh revolutionized the PC market thanks to its bitmap display and the mouse-centered interfaceoth copied from the Alto. While the Xerox Star series was a relative commercial success, it came too late. The expensive Xerox workstations could not compete against the cheaper GUI-based workstations that appeared in the wake of the first Macintosh, and Xerox eventually quit the workstation market for good.
See also
Douglas Engelbart and NLS
Mousepad
Alan Kay
BitBLT
Ethernet
Apple Macintosh
Apple Lisa
Xerox Star
Further reading
Hiltzik, Michael A. (1999). Dealers of Lightning: Xerox PARC and the Dawn of the Computer Age. New York: HarperCollins. ISBN 0887308910.
References
^ a b he History of the Xerox Alto. Carl J. Clement. March, 2002.
^ “Personal Computer Milestones”. Blinkenlights Archaeological Institute. http://www.blinkenlights.com/pc.shtml. Retrieved 2006-12-31.
^ “PBS Triumph of the Nerds Television Program Transcripts: Part III”. PBS (Public Broadcasting System). http://www.pbs.org/nerds/part3.html. Retrieved 2007-02-08.
^ a b Douglas K. Smith; Robert C. Alexander (1988). Fumbling the Future: How Xerox Invented, Then Ignored, the First Personal Computer. New York: William Morrow.
Alto User’s Handbook, Xerox PARC, September 1979
External links
Xerox Alto documents at bitsavers.org
At the DigiBarn museum
Xerox PARC History page
An article on the Xerox Alto in Byte magazine
The Alto in 1974 Video
A microcode-level Xerox Alto simulator
A lecture video of Butler Lampson describing Xerox Alto in depth. (length: 2h45m)
Categories: 1973 introductions | Xerox | Personal computers | Computer workstationsHidden categories: All articles with unsourced statements | Articles with unsourced statements from October 2009
About the Author
I am a professional writer from China Crafts Suppliers, which contains a great deal of information about laser diode pointer , remote mouse laser pointer, welcome to visit!
Xerox Laser Color Question
Multiple Fax Machines in One Office?
I am just wondering how we are able to set up two fax machines in one office. The office building we are in currently is two separate floors for about 10 offices.
We are wanting to have another fax machine set up on the upstairs floor to avoid having to go up and down stairs each time we want to fax something. Our dilemma is, we only have one phone line designated for fax, and about 4 for regular telephone lines.
How do we set up the second fax machine up on the network, so that both fax machines do not print incoming faxes, and so that the fax will goto the correct machine. (ie: upstairs offices receive upstairs faxes and vise versa).
We want to allow both to send and receive faxes if possible, but as we get some spam faxes that come through, we dont want to be printing them more than once (trying to save paper).
The two machines we have are:
Downstairs: Xerox Phaser 6180
Upstairs: Dell 2145cn Colour Laser
Any help would be very appreciated
I’m not sure how your phone systems are setup, but you would at least need to get another line for the additional fax machine. You could also convert one of the lines that you use for voice to your fax machine.
|
|
Xerox 106R01220 Toner Cartridge – 12000 Page-Yield, Yellow(sold individuall) $240.00 Xerox 106R01220 Toner Cartridge – 12000 Page-Yield, Yellow(sold individuall)… |
|
|
IVR83945 – Laser Toner for Xerox Phaser 7700 $131.93 Laser Toner for Xerox Phaser 7700… |
|
|
Brother MFC9560cdw Color Laser All-in-One with Wireless Networking and Duplex $547.09 The MFC-9560cdw color laser all-in-one combines print, copy, scan and fax in one powerful device. It produces high-impact color output at impressive print and copy speeds of up to 25ppm and offers flexible connectivity with its Wireless, Ethernet and USB interfaces. This all-in-one features automatic duplex print/copy/scan/fax and optional high yield toner cartridges are available to help lower yo… |
|
|
Canon imageCLASS D1120 Laser Multifunction Copier (3478B001AA) $499.99 Canon imageCLASS D1120 Multifunction Printer 3478B001 74… |
|
|
PREMIUM COMPATIBLE 4-Color Toner Cartridge, CLP-3004PK. The Generic CLP300 4 pack (Black, Cyan, Magenta, Yellow) toner is compatible with Samsung CLP-300, CLP-300N printers. $16.82 PREMIUM COMPATIBLE 4-Color Toner Cartridge, CLP-3004PK. The Generic CLP300 4 pack (Black, Cyan, Magenta, Yellow) toner is compatible with Samsung CLP-300, CLP-300N printers……. |
Xerox Laser Color Video
Xerox Phaser 6125 Color Printerr
It has never been easier to shop for Xerox Laser Color, so pick up Xerox Laser Color at bargain prices here at Pipindy.com!
Click Here To Go From Xerox Laser Color To Home Page
